Turn the scanner off and on using the scanner's power/On button. If the scanner is on a network, turn it on after connecting to the network. Disconnect all cables from your computer, except the power cord and any USB or Ethernet cable used for printing. Click [Next] to start the scanner update.
| - Do not use the scanner until the firmware update is complete. - It may take up to 15 minutes to complete the update. You cannot cancel or interrupt the update. - If the firmware update fails and the scanner goes into recovery mode (indicated by flashing status lights), you will not be able to update the scanner's firmware over a network connection. Connect your computer to the scanner using a USB cable instead and try updating the firmware again. See the documentation or visit Epson.com. to check if the scanner is in the recovery mode. - If the scanner is running on the battery, connect the power cable.